GMM-PD80 صمامات قطاعية
تفاصيل
المنتج الفنية
المنتج الفنية
| TYPE | A | B | Weight | |||||||
| mm | in | mm | in | Kg | lb | |||||
| GMM- PD80-1P | 133 | 5,23 | 88 | 3,46 | 7,58 | 16,71 | ||||
| GMM- PD80-2P | 177 | 6,97 | 132 | 5,19 | 10,96 | 24,16 | ||||
| GMM- PD80-3P | 221 | 8,7 | 176 | 9,93 | 14,34 | 31,61 | ||||
| GMM- PD80-4P | 265 | 10,43 | 220 | 8,66 | 17,37 | 39,06 | ||||
| GMM- PD80-5P | 309 | 12,16 | 264 | 10,39 | 21,1 | 46,51 | ||||
| GMM- PD80-6P | 353 | 13,89 | 308 | 12,12 | 24,48 | 53,96 | ||||
| GMM- PD80-7P | 397 | 16,63 | 352 | 13,85 | 27,86 | 61,41 | ||||
| GMM- PD80-8P | 441 | 17,36 | 396 | 15,19 | 31,24 | 68,86 | ||||
| GMM- PD80-9P | 485 | 19,09 | 440 | 17,32 | 34,62 | 76,31 | ||||
| GMM- PD80-10P | 529 | 20,82 | 484 | 19,06 | 38 | 83,76 | ||||
| GMM- PD80-11P | 573 | 22,56 | 528 | 20,79 | 41,38 | 91,21 | ||||
| GMM- PD80-12P | 617 | 24,29 | 572 | 22,52 | 44,76 | 98,66 | ||||
| PORT | BSP (Iso 228) 1/2” Series 3/4”Series |
UN-UNF (Iso 11926-1) | Metric (Iso 262) | |||||||
| P lnlet | G 1/2 | G 3/4 | 7/8-14 UNF | M27x2 | ||||||
| A-B Ports | G 1/2 | G 3/4 | 3/4 - 16 UNF | M22x1.5 | ||||||
| T Outlet | G 3/4 | G 3/4 | 7/8-14 UNF | M27x2 | ||||||
| Pneumatic | G 1/4 | G 1/4 | NPTF 1/8 - 27 | NPTF 1/8 - 27 | ||||||
| Carry-Over | G 3/8 | G 3/8 | G 3/8 | G 3/8 | ||||||
| Nominal Flow Rating / Displacement | 80 l/min | 21 U.S.G.P.M |
| Maximum Working Pressure (Series Circuit) | 210 Bar | 3050 PSI |
| Maximum Working Pressure (Parallel Circuit) | 315 Bar | 4600 PSI |
| Max. Back Pressure | 25 Bar | 360 PSI |
| Oil Temperature with NBR Seals | -20 to 80 C˚ | -4 to 176 F ˚ |
| with FPM (Viton) Seals | -20 to 100 C˚ | -4 to 212 F ˚ |
| Oil Viscosity – Operating Range | From 10 to 75 mm2/s | From 10 to 75 cSt |
| Minumum / Maximum | 10 / 400 mm2/s | 10 / 400 cSt |
| Oil Filtration | ≤30 µ | |
| Ambiant Temperature Range | -35 to 60 C˚ | -31 to 140 F ˚ |
| Number Of Spools | 1 to 12 | |
| Internal Leakage (at 100 bar (1450 PSI), 40C˚ (110 F˚), 46 cSt – A(B)—T) | 3 cm3/min | 0,18 in3/min |
| Max. Level Of Contamination | 19/16 - ISO 4406 | |
| Tie rod tightening torque | 30 Nm | 22 Ibft |