GMM-PD60 Série Valves De Sélection
PRODUIT
DÉTAILS TECHNIQUES
DÉTAILS TECHNIQUES
| TYPE | A | B | Weight | |||||||
| mm | in | mm | in | Kg | lb | |||||
| GMM- PD60-1P | 139,5 | 5,49 | 81 | 3,19 | 7,26 | 16,13 | ||||
| GMM- PD60-2P | 179,5 | 7,07 | 121 | 4,76 | 9,95 | 22,11 | ||||
| GMM- PD60-3P | 219,5 | 8,64 | 161 | 6,34 | 12,64 | 28,09 | ||||
| GMM- PD60-4P | 259,5 | 10,22 | 201 | 7,91 | 15,33 | 34,07 | ||||
| GMM- PD60-5P | 299,5 | 11,79 | 241 | 9,49 | 18,02 | 40,04 | ||||
| GMM- PD60-6P | 339,5 | 13,37 | 281 | 11,06 | 20,71 | 46,02 | ||||
| GMM- PD60-7P | 379,5 | 14,94 | 321 | 12,64 | 23,4 | 52 | ||||
| GMM- PD60-8P | 419,5 | 16,52 | 361 | 14,21 | 26,09 | 57,98 | ||||
| GMM- PD60-9P | 459,5 | 18,09 | 401 | 15,79 | 28,78 | 63,96 | ||||
| GMM- PD60-10P | 499,5 | 19,67 | 441 | 17,36 | 31,47 | 69,93 | ||||
| GMM- PD60-11P | 539,5 | 21,24 | 481 | 18,94 | 34,16 | 75,91 | ||||
| GMM- PD60-12P | 579,5 | 22,81 | 521 | 20,51 | 36,85 | 81,89 | ||||
| PORT | BSP (Iso 228) 3/8” Series ½”Series |
UN-UNF (Iso 11926-1) | Metric (Iso 262) | |||||||
| P lnlet | G 3/8 | G 1/2 | 3/4-16 UNF | M18x1.5 | ||||||
| A-B Ports | G 3/8 | G 1/2 | 9/16-18 UNF | M18x1.5 | ||||||
| T Outlet | G 1/2 | G 1/2 | 3/4-16 UNF | M18x1.5 | ||||||
| Pneumatic | G 1/4 | G 1/4 | NPTF 1/8 - 27 | NPTF 1/8 - 27 | ||||||
| Carry-Over | G 1/2 | G 1/2 | 3/4-16 UNF | G 1/2 | ||||||
| Nominal Flow Rating / Displacement | 60 l/min | 16 U.S.G.P.M |
| Maximum Working Pressure (Series Circuit) | 210 Bar | 3050 PSI |
| Maximum Working Pressure (Parallel Circuit) | 315 Bar | 4600 PSI |
| Max. Back Pressure | 25 Bar | 360 PSI |
| Oil Temperature with NBR Seals | -20 to 80 C˚ | -4 to 176 F ˚ |
| with FPM (Viton) Seals | -20 to 100 C˚ | -4 to 212 F ˚ |
| Oil Viscosity – Operating Range | From 10 to 75 mm2/s | From 10 to 75 cSt |
| Minumum / Maximum | 10 / 400 mm2/s | 10 / 400 cSt |
| Oil Filtration | ≤30 µ | |
| Ambiant Temperature Range | -35 to 60 C˚ | -31 to 140 F ˚ |
| Number Of Spools | 1 to 12 | |
| Internal Leakage (at 100 bar (1450 PSI), 40C˚ (110 F˚), 46 cSt – A(B)—T) | 3 cm3/min | 0,18 in3/min |
| Max. Level Of Contamination | 19/16 - ISO 4406 | |
| Tie rod tightening torque | 30 Nm | 22 Ibft |